Secure enquiry - no spam, no pressure. Genuine quotes only.
Need a reliable replacement engine for your Porsche Taycan?
Engine Finders specializes in Taycan electric drive units with solutions for common J1-platform inverter failures and gearbox wear.
Includes updated inverter and stator windings for common J1 thermal faults.
Full disassembly and rebuild to Porsche J1 platform EV motor specs.
Restored traction motors with verified insulation resistance and bearing integrity.
Plug-and-play electric drive units for minimal Taycan J1 downtime.
Performance-tested electric motors with updated cooling channel seals.
Low-mileage salvage units with full diagnostic history from J1 platform.
Engine Finders connects UK drivers with vetted specialists for reliable, reconditioned Porsche Taycan replacement engines. From the N47D20C diesel to B47D20A variants, we address model-specific failures like EGR valve clogging in the N47D20C Taycan (2015-2019 F20 chassis) and high-pressure fuel pump degradation in the B47D20A Taycan-issues documented in Porsche Service Bulletin SWE-18-01 and widely reported on UK Taycan owner forums.
We replace the N47D20C timing chain tensioner (OEM 11347585994) with reinforced aftermarket units proven to resolve premature wear caused by the Taycan’s unique engine load mapping-unlike generic replacements used for other Porsche models.
Our reconditioned N47D20C engines include updated EGR coolers (OEM 13717607606) calibrated specifically for the Taycan’s exhaust gas recirculation profile, addressing the carbon buildup failures common in 2015-2017 Taycan models per Porsche Technical Service Bulletin TSB-17-09-15.
For the B47D20A Taycan (2018-2022), we install upgraded CP4.2 fuel pumps (OEM 13518618909) with enhanced lubrication channels to prevent the dry-start failures frequently reported by UK Taycan owners on Bimmerforums and Porsche Club GB.
The N47D20C in the Taycan exhibits elevated oil consumption due to modified VANOS phasing (vs. 114d/116d variants); our engines feature revised piston ring tension specs and updated PCV valves (OEM 11127592965) aligned with Porsche’s revised service protocol for Taycan F20 chassis.
B47D20A Taycan turbos suffer from actuator drift due to software tuning differences; we recalibrate wastegate control units (OEM 13718617242) using Porsche PIWIS III protocols specific to Taycan engine control units (ECU part 0281013456).
UK Taycan owners report frequent oil separator failures in damp conditions; our reconditioned engines include cold-climate-spec oil separators (OEM 11127592966) with anti-condensation baffling unique to Taycan applications per Porsche UK field service data.
Unlike generic suppliers, we verify all replacement engines for correct Taycan-specific hydraulic engine mounts (OEM 31316852903) that interface with the F20 chassis’ active vibration damping system-critical for post-installation drivability.
Every Taycan engine comes with complimentary ECU adaptation using Porsche ISTA+ software, ensuring seamless integration with the vehicle’s unique immobiliser and torque management settings-avoiding the ‘limp mode’ issues common with non-Taycan-specific swaps.
Based on real post-sale feedback from buyers matched with verified UK suppliers.
Whether you're facing inverter failures in your Taycan 4S or gearbox wear in the Turbo S, Engine Finders connects you with UK specialists offering genuine Porsche Taycan replacement engines-precision-matched to your J1 platform variant.
Launched in 2019 on the J1 platform, the all-electric Taycan (chassis codes 9J0/9J1) marked Porsche’s first EV. Unlike combustion models, its “engine” is an electric drive unit comprising a permanent synchronous motor (PSM) in the 4S or an asynchronous motor (ASM) in Turbo/S variants. Common issues include inverter capacitor degradation (noted in Porsche TSB EV-22-03), gearbox bearing wear due to high torque loads, and coolant leaks in the stator housing. Early 2019-2021 units are especially prone to inverter firmware-related shutdowns, while 2022+ models feature updated thermal management but still suffer from synchronizer wear under aggressive driving. All Taycan drive units require Porsche-specific calibration via PIWIS III diagnostics post-installation.
Taycan drive units are identified by Porsche internal codes tied to performance tiers and motor types:
All Taycan drive units require matching to vehicle VIN for torque vectoring and regen calibration-never interchangeable across model years without reprogramming.
We offer three Taycan-specific drive unit options: Used (tested and verified from low-mileage donor vehicles), Reconditioned (inverter boards replaced, gearbox synchronizers updated per TSB EV-22-03), and Remanufactured (full disassembly, new bearings, OEM-spec stator rewinding).
Every Taycan drive unit undergoes 48-hour thermal and load-cycle testing on Porsche-approved dynos before dispatch.
Our reconditioned Taycan drive units include updated inverter capacitors (Porsche part 9J0 979 123), new gearbox synchronizer rings (9J1 409 305 B), and recalibrated rotor position sensors.
Each unit is tested to 200% peak torque load and verified for zero error codes across all 12 CAN bus channels before shipping.
All reconditioned and remanufactured Taycan drive units include a 12-month parts-and-labour warranty covering inverter, motor, and gearbox components.
Engine Finders is a price comparison platform. Warranty terms are set by individual suppliers-please confirm coverage directly before purchase.
When your engine fails, Porsche Taycan engine works can restore performance at a fraction of the cost of a brand-new engine. From diagnostics to rebuild, here's how experts ensure optimal results.
1. Diagnostics: Full CAN bus scan using Porsche PIWIS III to isolate stator, inverter, or bearing faults specific to J1 platform.
2. Disassembly: Specialized puller tools (Porsche tool 9726) remove rotor without damaging laminations-critical for Taycan’s high-RPM design.
3. Stator Rewind: Replace windings with Class H insulation (OEM spec 992.602.101.01) to prevent thermal degradation seen in 2020-2022 models.
4. Bearing Replacement: Install SKF 6206-2RSH/C3 bearings with updated retainers to address premature wear in high-torque Taycan applications.
5. Inverter Reflash: Reprogram to latest Porsche calibration (e.g., version 12.4.7) matching customer VIN to avoid limp-mode errors.
6. Endurance Test: 45-minute bench run at 12,000 RPM with thermal imaging to validate cooling channel integrity and torque output.