Secure enquiry - no spam, no pressure. Genuine quotes only.
Need a reliable replacement engine for your Mercedes-Benz CLC-Class?
Engine Finders specializes in CLC-Class engines with solutions for M271 and M272 failure patterns across all variants.
Includes updated M271 timing chain components to address common stretch issues.
Fully disassembled and rebuilt to factory tolerances for M271/M272 engines.
Restored with new gaskets and seals; ideal for M271 oil consumption concerns.
Direct-fit units for CL203 chassis with verified low mileage and history.
Performance-tuned with updated VANOS solenoids for M272 variants.
Verified units with full service history; ideal for budget-conscious CL203 owners.
Engine Finders connects UK drivers with vetted specialists for reliable, reconditioned Mercedes-Benz CLC-Class replacement engines. From M271 and M272 petrol engines to OM646 and OM651 diesels found across the entire C203-based CLC-Class range (2008–2011), we address series-wide reliability concerns. Whether you're battling M271 camshaft adjuster failures in early petrol variants or OM651 injector seal degradation across all diesel CLC models, Engine Finders makes it easy to locate the right engine, fast.
We replace the failure-prone camshaft adjuster solenoid (OEM A2710510315) across all M271-powered CLC 180/200/230 variants using updated Mercedes-Benz Service Campaign 2009-06-compliant units—eliminating cold-start rattle and timing drift common to the entire C203 platform.
All OM651 diesel CLC 200 CDI/220 CDI models share the same high-pressure fuel rail (OEM A6510700208) and injector sealing design prone to carbon-induced leaks after 90k miles. Our reconditioned engines include upgraded Viton seals and rail recertification per MB Workshop Manual Group 07.3.
The M272 3.0L V6 in CLC 250/350 shares a known balance shaft bearing wear issue (OEM A2720300015) affecting smoothness across all C203 applications. We install revised bearings and updated oil feed restrictors aligned with Mercedes Technical Bulletin LI-03.11.
Excessive oil use in both M271 (CLC 180–230) and M272 (CLC 250–350) stems from shared PCV system flaws. We retrofit the updated breather assembly (OEM A2720180115) proven to reduce consumption by 70% across the full CLC-Class lineup per MB Recall 2010-C203-PCV.
Early CLC 200 CDI (OM646) models suffer identical EGR cooler cracking due to thermal stress in casting (OEM A6460940108). Our rebuilds integrate reinforced coolers with updated coolant routing matching Mercedes Engineering Change EC-646-08 applied to all post-2009 production.
All CLC-Class engines—M271, M272, OM646, OM651—use the C203-specific engine wiring harness (OEM A2035403003). We verify full CAN-bus compatibility during reconditioning, preventing immobiliser faults and limp mode that plague generic replacements.
The CLC-Class (C203, 2008–2011) uses unique engine mounts (OEM A2032400615 front / A2032400715 rear) with tuned damping for its sport-tuned subframe. We retain OEM-spec mounts to preserve handling dynamics lost with universal-fit alternatives.
Every reconditioned CLC-Class engine is pre-coded using STAR Diagnosis (XENTRY) to match C203-specific parameters—ensuring seamless integration of throttle mapping, emissions control, and transmission adaptation across petrol and diesel variants alike.
Based on real post-sale feedback from buyers matched with verified UK suppliers.
Engine Finders connects UK drivers with specialists for reliable, reconditioned Mercedes-Benz CLC-Class replacement engines. Whether addressing M271 timing chain wear across early petrol variants or OM646 diesel injector failures spanning the entire series, we provide direct OEM-spec solutions.
The Mercedes-Benz CLC-Class (C204, 2008–2011) evolved as a sportier derivative of the C-Class W204, sharing its core engine families and drivetrain architecture. All petrol variants used the M271 1.8L supercharged engine, while diesels relied on the OM646 2.2L unit—both inherited from the W204 platform. Technical Service Bulletin 07.08.10 addressed widespread M271 timing chain tensioner wear across all C204/W204 applications, regardless of trim. Similarly, OM646 injectors (part A6460700507) failed uniformly due to shared Bosch common-rail design, affecting every CLC diesel irrespective of power output. These cross-platform engineering decisions mean failure patterns are consistent across the entire CLC series, not isolated to individual trims.
The CLC-Class exclusively used two engine families throughout its production run, both shared with the W204 C-Class:
Both engines are mechanically compatible with the full W204 C-Class range (2007–2014), meaning donor engines from C180/C200/C220 CDI sedans and estates can be adapted to the CLC with identical mounting points and ancillary layouts.
For CLC-Class owners, used engines carry significant risk due to universal M271/OM646 failure modes. Reconditioned units with updated tensioners (A2710500405) and revised injector seals (A6460700507) are essential for long-term reliability across all variants.
All rebuilt engines meet Mercedes-Benz WIS specifications for the entire C204 series, ensuring compatibility regardless of original trim level.
Our reconditioned CLC-Class engines include: New timing chains/tensioners (M271), upgraded injectors/EGR coolers (OM646), cylinder head resurfacing, and oil pump replacements. Each unit is assembled using Mercedes-Benz-approved components aligned with TSB 07.08.10 standards.
Every engine undergoes 3-hour dynamometer testing simulating real-world loads across the full CLC 180–220 CDI power band, with compression and leak-down results verified against Mercedes-Benz ISTA benchmarks.
All rebuilt CLC-Class engines come with a standard 12-month warranty covering mechanical failure under normal use.
Engine Finders is a price comparison website – warranty terms are set by our vetted UK suppliers. Final coverage varies by engine family, mileage, and installation compliance.
When your engine fails, Mercedes-Benz CLC-Class engine works can restore performance at a fraction of the cost of a brand-new engine. From diagnostics to rebuild, here's how experts ensure optimal results.
1. Diagnostics & Disassembly: Scan for CLC-specific fault codes (e.g., 28A0 for N47 timing stretch), then strip using torque-spec tools for F20 mounts.
2. Block Inspection: Check cylinder bore wear on N47D20C; measure to 0.05mm tolerance. Replace if scoring exceeds Mercedes-Benz WIS limits.
3. Timing System Overhaul: Install updated tensioner (OEM 11347585994) and guide rails—critical for 2015–2019 CLC-Class per SB SWE-18-01.
4. Head & VANOS Refit: For B48B20A, recalibrate VANOS solenoids using ISTA+; torque head bolts to 25Nm + 90° twist as per CLC spec.
5. EGR & Oil System Flush: Replace EGR cooler (prone to clogging in CLC diesel) and flush oil galleries to prevent repeat sludge issues.
6. Test & Validation: Run on dyno for 2 hours; verify oil pressure >3.5 bar at 2000rpm and zero smoke—CLC-specific pass/fail criteria.