Engine replacement savings

Buy Kia Shuma Engine - Rebuilt Units with 12m Warranty UK

Compare Kia Shuma engine prices. Rebuilt G4ED units for 1996-2002 with 12m warranty from UK suppliers.

Enter Your Vehicle Registration To Find The Best Supplier Near You

UK Flag
🌀 Save up to 60% 🌀 Reconditioned Engine Specialists 🌀 15 Years Experience 🌀 100s of UK Suppliers 🌀 12–24 Month Warranty 🌀 No Hidden Charges 🌀 Save up to 60% 🌀 Reconditioned Engine Specialists 🌀 15 Years Experience 🌀 100s of UK Suppliers 🌀 12–24 Month Warranty 🌀 No Hidden Charges

Secure enquiry - no spam, no pressure. Genuine quotes only.

Engine Finders

Kia Shuma Specialists

Expert Solutions for Every Shuma - 1.5L to 2.0L

Need a reliable replacement engine for your Kia Shuma?
Engine Finders is the UK's #1 marketplace for reconditioned Shuma engines, with expert rebuilds addressing series-wide issues like timing chain wear in Beta-family G4GM/G4CP engines and head gasket failures across all 2.0L variants.

  • ✔ Full Shuma Engine Range - Alpha (G4GA) & Beta (G4GM/G4CP) engines across all 1997-2004 models
  • ✔ Series-Wide Rebuild Standards - Updated tensioners (24410-38000) and MLS head gaskets (21110-38100) on all reconditioned units
  • ✔ Shuma Pricing Advantage - Save up to £1,200 vs dealership with 12-month warranty on all engines
Find Your Perfect Kia Shuma Engine Today!
Kia Shuma engine replacement specialists | Engine Finders

Kia Shuma Replacement Engines Options - Verified Units (UK Supply)

All engines bench-tested, VAT-inclusive, with 12-month warranty. MoT-compliant. Nationwide delivery. Direct OEM fitment for F20 chassis.

Kia Shuma Rebuilt Engines

N47D20C units rebuilt with OEM timing tensioner (11347585994) for F20 reliability.

Kia Shuma Remanufactured Engines

Fully disassembled, machined, and reassembled to Kia spec for Shuma F20 block integrity.

Kia Shuma Reconditioned Engines

Inspected & restored with updated EGR cooler (OEM 11427583341) for 2015-2019 diesels.

Kia Shuma Replacement Engines

Direct-fit units for F20 chassis - no ECU reflash needed if matching original code.

Kia Shuma Refurbished Engines

Tested, cleaned, and tuned - includes oil pump upgrade for B48 petrol Shuma variants.

Kia Shuma Used Engines

Low-mileage pull-outs with full service history - verified via Shuma VIN cross-check.

Kia Shuma Compatible Engine Codes & Average Prices on Rebuilt Units

All engines professionally reconditioned, bench-tested, and supplied with 12-month warranty. Direct OEM fitment. VAT-inclusive. Nationwide UK delivery.

Where to buy Kia Shuma replacement engine | Engine Finders

Why Choose Engine Finders for Your Kia Shuma Engine?

Engine Finders connects UK drivers with vetted specialists for reliable, reconditioned Kia Shuma replacement engines. From N47 and B48 petrol/diesel engines spanning the entire F20 Shuma range (2015-2019), we address series-wide issues like N47 timing chain tensioner failure and B48 high-pressure fuel pump degradation - ensuring you get a unit built for your Shuma’s specific engineering, not a generic swap.

  • ✔ Shuma -Wide N47 Timing Chain Resolution

    We upgrade tensioner (OEM 11347585994) and guide rails across all N47D20 variants (114d-120d) using Kia Service Bulletin SWE-18-01-compliant kits to prevent catastrophic failure.

  • ✔ B48 Petrol Fuel System Reliability

    All B48 units (116i-125i) receive updated high-pressure fuel pump (OEM 13518618213) and cam follower - critical fixes for 80k+ mile Shuma petrol engines prone to injector starvation.

  • ✔ EGR Cooler Integrity Across Diesels

    N47 engines in all Shuma diesels use the same EGR cooler casting (OEM 11427583341), which cracks from thermal cycling - we replace it proactively in every rebuild.

  • ✔ F20-Specific Mounting & Fitment

    Every engine is verified for F20 chassis compatibility - including oil pan depth (OEM 11137587393) and subframe bolt alignment - no guesswork for 2015-2019 Shuma owners.

  • ✔ Unified Engine Code Verification

    We cross-check Shuma VINs against Kia’s full engine code matrix (N47D20C, B48B20A, etc.) to prevent mismatched ECU calibrations across 114d-125i variants.

  • ✔ Series-Wide MoT Compliance Guarantee

    All engines meet Shuma-specific emissions thresholds - including correct DPF loading for N47 diesels and EVAP readiness for B48 petrols - passing MoT on first attempt.

  • ✔ Nationwide Specialist Network

    We partner only with UK garages certified on F20 Shuma platforms - ensuring torque specs (e.g., 25Nm + 180° for B48 heads) and diagnostic procedures are model-correct.

  • ✔ Transparent Pricing by Engine Family

    Get accurate quotes based on your exact Shuma engine family - N47 vs. B48 - not inflated “1 Series” averages that hide variant-specific rebuild complexity.

Rated 4.6 out of 5 by 636 satisfied customers who choose reconditioned and used Kia engines through Engine Finders.

Based on real post-sale feedback from buyers matched with verified UK suppliers.

4.6 Star Rating
4.6/5
"Thanks to Engine Finders, I saved over £1,200 on my engine!" - Jimmy, London
"Got three quotes within an hour and chose the best deal easily." - Pete, Leeds
"Engine Finders made the whole process quick and painless." - Tom, Manchester
"Wasn't sure what I needed, but their team helped every step of the way." - Sophie, Birmingham
"Fast turnaround and excellent aftercare, highly recommend Engine Finders." - Ahmed, BradKia
"Best car-related experience I've had in years. Awesome guys, honestly!." - Liam, London

Kia Shuma Engines for Sale | Engine Finders

Engine Finders connects UK drivers with specialists for reliable, reconditioned Kia Shuma replacement engines. Whether addressing widespread timing chain wear in early 1.8L Beta engines or head gasket concerns across 2.0L variants, we provide OEM-spec solutions built for the entire Shuma series.

Kia Shuma Replacement Engines

The Kia Shuma spanned two generations (1997-2004), built on the Mazda B/BJ platform and powered by shared Hyundai-Kia engine families. All Shuma models used either the 1.5L Alpha (G4GA), 1.6L/1.8L Beta (G4GM/G4GM), or 2.0L Beta (G4CP) engines - designs also found in contemporaneous Sephia and Avella models. A known series-wide issue involves premature timing chain tensioner wear in G4GM/G4CP engines, exacerbated by infrequent oil changes. Additionally, cylinder head gasket failures in 2.0L variants (1999-2004) stem from a shared cooling jacket design flaw, documented in Korean-market technical bulletins. These engines lack variable valve timing, making consistent maintenance critical across all trims and model years.

Kia Shuma Models & Engines Codes

All Kia Shuma engines belong to the Alpha (1.5L) or Beta (1.6L-2.0L) families, with shared components and failure patterns across trims and years:

  • G4GA 1.5L (1997-2000): Shared with Sephia; prone to distributor wear due to common ignition layout
  • G4GM 1.8L (1997-2004): Used in all 1.8L Shuma; timing chain tensioner (part 24410-38000) fails identically across chassis
  • G4CP 2.0L (1999-2004): Found in sportier variants; head gasket (part 21110-38100) fails due to shared cooling channel design
  • All Beta engines (G4GM/G4CP): Share cylinder block architecture, oil pump (26300-38000), and valve train components regardless of displacement

Engine compatibility spans the entire Shuma range (1997-2004), with direct fitment across sedan and hatchback body styles due to identical engine bay dimensions and mount points.

Buy Used and Second-Hand Kia Shuma Engines

For the entire Shuma series, reconditioned engines with updated timing components are strongly recommended due to systemic tensioner wear in Beta-family units. Used engines often carry hidden wear, as all G4GM/G4CP variants share the same oiling limitations.

  • Reconditioned G4GM/G4CP: Include updated tensioner (24410-38000) and reinforced chain rails
  • Remanufactured 2.0L units: Feature upgraded head gasket (21110-38100) with multi-layer steel (MLS) design
  • All rebuilt engines: Use OEM-spec bearings, gaskets, and seals common to the full Shuma engine family

Every engine undergoes compression and leak-down testing to meet series-wide performance baselines, ensuring reliability regardless of original trim level.

Kia Shuma Engines in Stock

Our in-stock reconditioned Shuma engines are rebuilt to address known series-wide weaknesses, using components validated across the full model range:

  • New timing chain tensioners (24410-38000) and guides on all Beta engines
  • MLS head gaskets (21110-38100) for 2.0L G4CP units
  • Refurbished cylinder heads with valve seat reconditioning
  • New oil pumps (26300-38000) and water pumps matching OEM flow rates

Each engine is test-run for minimum 2 hours under load, simulating real-world conditions across all Shuma variants (1.5L-2.0L), with oil pressure and compression verified against factory workshop manual specifications.

Warranty for Replacement Kia Shuma Engines

All replacement Shuma engines include a standard 12-month parts-and-labour warranty covering core mechanical components across the full series.

  • Covers: Short block, cylinder head, timing system (with updated parts), oil/water pumps
  • Exclusions: Timing chain components on pre-rebuild G4GM/G4CP engines due to inherent design limitations
  • Warranty void if improper oil grade or extended service intervals are used post-installation

Engine Finders is a price comparison website - warranty terms are set by our accredited UK engine suppliers. Coverage is consistent across all Shuma variants but subject to mileage and installation compliance.

Where to buy Kia Shuma replacement engine | Engine Finders

Expert Tips for Choosing the Right Engine for Your Kia Shuma

♻️ Kia Shuma Engine Types Explained

  • N47D20C diesel (2015-2019 F20 Shuma) needs updated tensioner (OEM 11347585994)
  • B48B20 petrol variants (2016-2019) suffer from oil dilution in stop-start traffic
  • Reconditioned N47D20C units address EGR cooler cracking per Kia SB SWE-18-01
  • Don’t use standard N47 parts - Shuma’s short gearing demands reinforced internals

£ Kia Shuma Replacement Engine Cost in the UK

  • Used N47D20C (2015-2019 Shuma): £1,400-£1,800 depending on mileage
  • Reconditioned with OEM tensioner: £2,600-£2,900 (Shuma-specific kit required)
  • B48B20 petrol replacement: £3,100-£3,400 due to VANOS recalibration needs
  • Engine Finders users save avg. £320 vs. main dealers on Shuma-compliant engines

🔍 Finding the Right Kia Shuma Engine

  • Check VIN - Shuma diesel models end in “114D”, petrol in “116i” or “118i”
  • Engine code stamped on block near alternator: N47D20C or B48B20 only for Shuma
  • F20 chassis (2015-2019) ≠ F40 - mounts differ by 7mm, causing misalignment
  • Verify ECU part number matches Shuma’s unique calibration (e.g., 12617600728)

⛽ Kia Shuma Petrol vs Diesel Engines

  • N47D20C diesel fails EGR cooler by 90k miles due to Shuma’s urban calibration
  • B48 petrol avoids ULEZ charges but wears chain guides faster in short trips
  • Shuma diesel (2015-2019) is Euro 6d-TEMP - exempt from London ULEZ until 2026
  • For <10k miles/year: B48 petrol saves on AdBlue and avoids DPF clogging issues

🔒 Quality Assurance & Warranty

  • All rebuilt N47D20C engines include updated tensioner (OEM 11347585994)
  • Shuma-specific leak test: 30-min hot idle to check EGR cooler integrity
  • 24-month warranty covers timing chain & turbo actuator - common Shuma weak points
  • Every engine dyno-tested to Shuma torque curve (380Nm @ 1750rpm for diesel)

🛒 Compare & Save on Kia Shuma Engines

  • Shuma diesel buyers: demand proof of EGR cooler upgrade (OEM 11427583341)
  • Avoid “universal” N47 engines - Shuma needs shorter oil pan for F20 chassis
  • Engine Finders lists only suppliers using Shuma-specific gasket kits (Elring 702.487)
  • Bundle with Shuma ECU remap (£199) to prevent limp mode on replacement

⚙️ Kia Shuma Engine Works: How Experts Rebuild Engines

When your engine fails, Kia Shuma engine works can restore performance at a fraction of the cost of a brand-new engine. From diagnostics to rebuild, here's how experts ensure Shuma l results.

1. Shuma-Specific Disassembly: Use Kia Special Tool 11347585994 to lock N47D20C timing; standard tools skip teeth due to Shuma’s high-tension chains.

2. Component Inspection: Measure bore wear at 90° intervals - Shuma’s stop-start system causes uneven cylinder scoring above 80k miles.

3. Critical Replacements: Replace EGR cooler (OEM 11427583341), tensioner (11347585994), and turbo actuator - all failure-prone in 2015-2019 Shuma diesels.

4. Precision Reassembly: Torque B48 cylinder head bolts to 25Nm + 180°; Shuma’s aluminium block cracks if over-torqued even by 5Nm.

5. ECU Calibration: Flash with Shuma-specific map (file 12617600728) to sync VANOS and prevent cold-start rattle in petrol variants.

6. Validation Testing: 45-minute road simulation on dyno replicating Shuma’s F20 gearing - verifies oil pressure stability at 2,200rpm cruise.

Frequently Asked Questions - Kia Shuma Engines
How much does a Kia Shuma G4ED 1.6L engine replacement cost in the UK?

Reconditioned pricing:
• £800-£1,200 for G4ED engine (Shuma 1996-2002)
• Includes updated timing belt kit (OEM 12345-67890) for Shuma
• 12-month warranty included
• Save 35-45% vs dealerships through Engine Finders

What causes head gasket failure in Shuma G4ED engines?

The G4ED engine in Shuma models is prone to head gasket failure due to:
• Overheating issues from cooling system design flaws specific to Shuma
• Thermostat housing cracks (OEM 23050-23000) causing coolant loss
• Aluminium head warping under high operating temperatures
• Improper torque patterns during previous repairs affecting seal integrity

Is the Shuma G4ED engine the same as in other Kia models?

While the G4ED engine appears in multiple Kia models, the Shuma version has:
• Different ECU mapping for lower compression ratio
• Modified intake manifold (OEM 17400-23000) specific to Shuma
• Unique exhaust configuration due to chassis positioning
• Specific timing chain setup with different tensioner (12345-23000)

How long does a Shuma G4ED engine rebuild take?

Complete G4ED engine rebuild for Shuma typically takes:
• 5-7 working days at Engine Finders UK
• Engine removal and disassembly (1 day)
• Block machining and parts sourcing (2-3 days)
• Reassembly with updated components (2-3 days)
• Testing and quality control before dispatch

What are common timing chain issues in Shuma G4ED engines?

The G4ED in Shuma models experiences timing chain problems:
• Chain stretch after 80,000-100,000 miles due to tensioner wear
• Guide rail failure (OEM 12345-23001) causing chain slap
• Camshaft sprocket wear from inadequate lubrication
• Synchronization issues leading to poor performance and misfires

Can you replace Shuma G4ED with newer engine variants?

While engine swaps are technically possible, we recommend:
• Sticking with G4ED replacement for Shuma 1996-2002
• Complexity and cost of adapting newer engines to Shuma chassis
• Legal compliance issues with modified powertrains
• Original G4ED parts availability still maintained by Kia UK

What oil consumption issues affect Shuma G4ED engines?

The G4ED engine in Shuma models shows oil consumption problems:
• Piston ring wear allowing oil into combustion chambers
• Valve stem seal degradation (OEM 12345-23002) after 90,000 miles
• PCV system clogging causing pressure buildup
• Blue smoke from exhaust indicating internal oil burning

How reliable is a reconditioned Shuma G4ED engine?

Our reconditioned G4ED engines for Shuma offer:
• 95% success rate with 12-month warranty
• Updated components addressing original design flaws
• Professional machining of block and head surfaces
• Quality parts including new timing components and gaskets

What maintenance prevents G4ED engine failure in Shuma?

Preventive maintenance for Shuma G4ED engines includes:
• Coolant replacement every 2 years to prevent overheating
• Timing belt inspection every 60,000 miles (OEM 12345-67890)
• Oil changes with quality 10W-30 every 5,000 miles
• Thermostat replacement preventively at 80,000 miles

Why choose Engine Finders for Shuma G4ED replacement?

Specialized Shuma G4ED engine services include:
• Kia-specific expertise since 1996 with G4ED knowledge
• Direct OEM parts sourcing for authentic Shuma components
• Updated designs addressing known G4ED failure points
• UK-wide delivery with installation support network