Secure enquiry - no spam, no pressure. Genuine quotes only.
Need a reliable replacement engine for your Ford Tourneo ?
Engine Finders specializes in Tourneo engines with solutions for common turbo, EGR, and injector failures across all generations and body styles.
Rebuilt with updated turbo & EGR valves for MK7/VC3 diesel variants.
Fully disassembled, machined, and rebuilt to Ford WSS-M99C26-A2 specs.
Restored with new injectors & oil pump for Tourneo Connect petrol models.
Plug-and-play fit for MK7 Custom & VC3 Connect chassis variants.
Dynamometer-tested with HPFP upgrades for 1.0L/1.5L EcoBoost units.
Low-mileage pull-outs with full service history and no DPF faults.
Engine Finders supports UK drivers with vetted specialists for reliable, reconditioned Ford Tourneo replacement engines. From Duratorq and EcoBlue diesel families to EcoBoost petrol units found across the Tourneo Custom, Courier, and Connect series, we address shared failure patterns like Puma TDCi timing chain stretch, EcoBoost carbon buildup, and EGR cooler corrosion affecting all T6/T7 and B276 chassis variants. Whether you're battling injector failure in early 2.2L units or high-pressure fuel pump wear in 2.3L EcoBoost applications, Engine Finders makes it easy to locate the right engine, fast.
We replace the failure-prone timing chain kit (OEM 1840281) across all 2.0L/2.2L Duratorq Puma engines in T6/T7 Tourneo Custom and Transit variants (2012-2016), using Ford Technical Service Bulletin 32/2014-compliant components to eliminate premature stretch and tensioner collapse.
All 2016+ EcoBlue 2.0 TDCi Tourneo engines (T6.2/T7 chassis) suffer from identical EGR cooler cracking due to shared casting design. We install reinforced OEM cooler (part CV6W-9F479-BA) with updated coolant routing to prevent repeat failures across Limited, Active, and base variants.
From 1.0L to 2.3L EcoBoost units in Tourneo Courier and Custom, direct injection causes identical intake valve coking. We perform full decarbonisation and fit updated intake manifolds (OEM CV6Z-9424-A) proven effective across B276 and T6 platforms per Ford Engineering Note EN-2021-08.
Early 2.2L and 2.5L Duratorq engines (2012-2018 Tourneo Custom/Courier) share faulty injector copper seals (OEM 1423747) leading to combustion gas leakage. Our rebuilds include OEM-spec seals and recalibrated fuel rails to restore combustion integrity across all chassis.
The 1.5L and 2.3L EcoBoost engines-used in Tourneo Courier through Custom Titanium-share identical electronic turbo actuators (OEM CV6W-9K477-AA) prone to signal drift. We fit updated actuators and validate boost control across all variants via OEM-spec bench testing.
All Tourneo diesel engines (2.0L-2.5L Duratorq/EcoBlue) use the same oil cooler housing (OEM 1822169), which cracks under thermal stress. We replace it with reinforced alloy units and pair with multi-layer steel gaskets (OEM 1847122) proven across T6, T7, and B276 applications.
Tourneo Custom (T6/T7) and Courier (B276) use distinct hydraulic engine mounts (OEM 1847892 vs. CV6W-6028-A), but both degrade causing vibration. We supply correct OEM-spec mounts matched to your chassis code-ensuring seamless fitment across the entire Tourneo series.
Unlike generic suppliers, Engine Finders partners exclusively with UK workshops certified in Ford Tourneo engine families-ensuring rebuilds meet series-specific tolerances for Duratorq, EcoBlue, and EcoBoost across all body styles, years, and power outputs.
Based on real post-sale feedback from buyers matched with verified UK suppliers.
Engine Finders connects UK drivers with specialists offering reliable, reconditioned Ford Tourneo replacement engines. Whether you're facing turbo failure in 1.0L EcoBoost Tourneo Connects or EGR issues in 2.0L Bi-Turbo diesel Customs, we provide OEM-spec solutions across all generations.
The Ford Tourneo spans three key platforms: the original MK7 Tourneo Custom (2012-2023) based on the Transit, the VC3 Tourneo Connect (2014-2023) sharing architecture with the Transit Connect, and the all-new V363 Tourneo (2023-present). All diesel variants (2.0L TDCi/Bi-Turbo) suffer from EGR cooler cracking due to shared casting design, while 1.0L/1.5L EcoBoost petrol units across MK7/VC3 models commonly experience HPFP and timing belt degradation. Ford Technical Service Bulletin TSB-21-2043 addresses injector carboning in all 2.0L diesel Tourneo variants regardless of trim.
Engine families are consistent across Tourneo Custom and Connect body styles within each chassis generation:
All engines maintain cross-compatibility within their chassis families (e.g., CAGDA fits all MK7 diesel Customs 2016-2023), but are not interchangeable between MK7, VC3, and V363 platforms due to differing mounts and ECU protocols.
While used engines offer short-term savings, they carry significant risk due to shared failure modes across the Tourneo range. Reconditioned or remanufactured units are strongly recommended for long-term reliability.
All Engine Finders suppliers verify engine history via Ford IDS diagnostics and provide compression reports before sale.
Our UK network stocks reconditioned Tourneo engines rebuilt to Ford WSS-M99C26-A2 standards, with critical updates applied across all variants:
Every engine undergoes 90-minute hot bench testing with oil pressure, compression, and vacuum verification per Ford diagnostic protocols for the entire Tourneo series.
All reconditioned and remanufactured engines come with a minimum 12-month unlimited mileage warranty from our certified UK suppliers.
Engine Finders is a price comparison platform - warranty terms are set by individual suppliers. Always confirm coverage details before purchase.
When your engine fails, Ford Tourneo engine works can restore performance at a fraction of the cost of a brand-new engine. From diagnostics to rebuild, here's how experts ensure optimal results.
1. Diagnostic Scan & VIN Match: Using Ford IDS, we confirm Tourneo-specific fault codes (e.g., P0016 on N47D20C) and cross-check against F20 chassis service history to isolate variant-specific wear.
2. Full Strip-Down with OEM Tooling: Specialized timing tool 11347585994 is used exclusively for Tourneo N47 engines to prevent cam phaser misalignment during disassembly.
3. Component Inspection & Replacement: For 2015-2019 Tourneo, we replace timing chain, tensioner (OEM 11347585994), EGR cooler, and updated guide rails per Ford SB SWE-18-01.
4. Precision Rebuild to Tourneo Tolerances: Cylinder head bolts torqued to 25Nm + 90° turn (Tourneo B47 spec), not generic Ford settings - critical for head gasket longevity.
5. Bench Testing Under Load: Simulated 70mph motorway runs on dyno while monitoring oil pressure and EGR flow - Tourneo engines must pass 120-minute thermal cycle test.
6. Post-Rebuild Calibration: ECU flashed with Tourneo-specific maps (not shared with 116d), ensuring correct turbo boost and DPF regeneration cycles for F20 chassis.