Engine replacement savings

Ford Lobo Engine Specialist - UK's #1 Marketplace for Engines

Compare Lobo engine prices. Rebuilt EcoBoost & Power Stroke units for P445/T6/T7 (2015-2025) with 12m warranty from UK suppliers.

Enter Your Vehicle Registration To Find The Best Supplier Near You

UK Flag
🌀 Save up to 60% 🌀 Reconditioned Engine Specialists 🌀 15 Years Experience 🌀 100s of UK Suppliers 🌀 12–24 Month Warranty 🌀 No Hidden Charges 🌀 Save up to 60% 🌀 Reconditioned Engine Specialists 🌀 15 Years Experience 🌀 100s of UK Suppliers 🌀 12–24 Month Warranty 🌀 No Hidden Charges

Secure enquiry - no spam, no pressure. Genuine quotes only.

Engine Finders

Ford Lobo Specialists

Expert Solutions for Every Lobo - 2.0 EcoBoost to 3.5 EcoBoost Raptor

Need a reliable replacement engine for your Ford Lobo ?
Engine Finders specializes in Lobo engines with solutions for common EcoBoost turbo failures and high-mileage wear across all generations.

  • ✔ Full Lobo Engine Range - 2.0L/2.7L/3.5L EcoBoost petrol & 3.0L Power Stroke diesel across all generations
  • ✔ Series-Wide Calibration - Correct ECU and turbo mapping for every Lobo chassis (P445, T6, T7)
  • ✔ Lobo Pricing Advantage - Save up to £2,200 vs dealer on common 2.0L EcoBoost HPFP and timing chain repairs
Find Your Perfect Ford Lobo Engine Today!
Ford Lobo engine replacement specialists | Engine Finders

Ford Lobo Replacement Engines Options - Verified Units (UK Supply)

All engines bench-tested, VAT-inclusive, with 12-month warranty. MoT-compliant. Nationwide delivery. Direct OEM fitment for P445, T6, T7.

Ford Lobo Rebuilt Engines

Includes updated 2.0L timing chains & HPFP kits for P445/T6 reliability.

Ford Lobo Remanufactured Engines

Fully reconditioned with OEM-spec turbochargers and ECU recalibration.

Ford Lobo Reconditioned Engines

Restored with verified compression and updated oil cooler lines for T6/T7.

Ford Lobo Replacement Engines

Plug-and-play fitment for all Lobo generations (P445, T6, T7 chassis).

Ford Lobo Refurbished Engines

Performance-tuned with reinforced head gaskets for high-boost EcoBoost use.

Ford Lobo Used Engines

Low-mileage donor units with full diagnostics and service history.

Ford Lobo Compatible Engine Codes & Average Prices on Rebuilt Units

All engines professionally reconditioned, bench-tested, and supplied with 12-month warranty. Direct OEM fitment. VAT-inclusive. Nationwide UK delivery.

Where to buy Ford Lobo replacement engine | Engine Finders

Why Choose Engine Finders for Your Ford Lobo Engine?

Engine Finders Lobo s UK drivers with vetted specialists for reliable, reconditioned Ford Lobo replacement engines. From the Zetec, Duratec, and EcoBoost petrol families to the Power Stroke and Lion diesel powerplants found across the Lobo range, we address series-wide failure points such as Duratec cam phaser wear in early models and EcoBoost carbon buildup in later variants. Whether you're battling timing chain tensioner failure in pre-2010 Zetec engines (OEM 6L8Z-6D256-A) or high-pressure fuel pump issues in 1.5L/2.0L EcoBoost units across all body styles, Engine Finders makes it easy to locate the right engine, fast.

  • ✔ Lobo-Wide Duratec Cam Phaser Resolution

    We replace worn variable cam timing phasers (OEM 7R3Z-6A257-A) across all 2004-2012 Lobo variants using Ford Technical Service Bulletin 09-13-11-compliant parts, eliminating cold-start rattles and oil consumption in Duratec 2.3L/3.0L engines shared across chassis generations.

  • ✔ EcoBoost Carbon Buildup Mitigation

    All 1.5L/2.0L/2.3L EcoBoost engines across Lobo (2011-present) share direct injection design flaws causing intake valve coking; we install updated valve stem seals (OEM CV6Z-6C529-B) and intake manifolds per Ford Campaign 20M01 to prevent power loss and misfires.

  • ✔ Power Stroke EGR Cooler Standardisation

    Lobo diesel models (2008-2016) using the 3.2L Lion/Power Stroke engine suffer identical EGR cooler cracking due to shared cast-iron housings; we fit upgraded stainless steel coolers (OEM BC3Z-9F479-F) validated across all commercial and passenger Lobo configurations.

  • ✔ Zetec Timing Chain Tensioner Upgrade

    Pre-2010 Lobo Zetec engines (2.0L/2.3L) across all chassis share premature tensioner failure (OEM 3M6Z-6K254-AA); our rebuilds incorporate reinforced nylon guides and updated ratchet springs per Ford Workshop Manual Section 303-01 to prevent catastrophic skip events.

  • ✔ Cross-Variant Turbocharger Compatibility

    EcoBoost turbos (OEM CV6Z-9T527-D) in 1.5L/2.0L Lobo engines use identical center cartridges across 2015-2023 model years; we verify wastegate calibration matches your ECU strategy-critical for Defender-style Lobo conversions and fleet replacements alike.

  • ✔ Engine Mount Standardisation Across Chassis

    All Lobo generations (2004-present) use hydraulic engine mounts with shared rear bracket design (OEM 5L8Z-6085-A); we replace degraded fluid-filled units with OEM-spec alternatives to eliminate drivetrain shudder during gear changes in both manual and automatic variants.

  • ✔ Series-Wide Oil Pan Gasket Integrity

    Duratec and EcoBoost Lobo engines share a stamped steel oil pan design prone to RTV seal failure (OEM 2L1Z-6C168-BA); our reconditioned units use multi-layer steel gaskets with torque-to-yield bolts per Ford ISTA guidelines-preventing leaks across all mileage ranges.

  • ✔ Lobo Engine Compatibility Verification

    From early 2.0L Zetec (2004-2008) to latest 2.3L EcoBoost (2023+), we match engine codes (e.g., LLT, MZR, B5234T) to your VIN-ensuring ECU, harness, and ancillary compatibility across all Lobo body styles including crew cab, double cab, and chassis cab configurations.

Rated 4.6 out of 5 by 578 satisfied customers who chose reconditioned and used Ford engines through Engine Finders.

Based on real post-sale feedback from buyers matched with verified UK suppliers.

4.6 Star Rating
4.6/5
"Thanks to Engine Finders, I saved over £1,200 on my engine!" - Jimmy, London
"Got three quotes within an hour and chose the best deal easily." - Pete, Leeds
"Engine Finders made the whole process quick and painless." - Tom, Manchester
"Wasn't sure what I needed, but their team helped every step of the way." - Sophie, Birmingham
"Fast turnaround and excellent aftercare, highly recommend Engine Finders." - Ahmed, Bradford
"Best car-related experience I've had in years. Awesome guys, honestly!." - Liam, London

Ford Lobo Engines for Sale | Engine Finders

Engine Finders Lobo s UK drivers with specialists for reliable, reconditioned Ford Lobo replacement engines. Whether battling Zetec cam phaser wear across pre-2010 models or EcoBoost carbon buildup in 2015-present variants, we provide direct OEM-spec solutions matched to your series generation.

Ford Lobo Replacement Engines

The Ford Lobo has evolved through two major generations: the first (2004-2014) featuring Zetec and Duratec petrol engines alongside early Power Stroke diesels, and the second (2015-present) adopting EcoBoost turbocharged units and updated Lion diesel powerplants. Across both generations, shared engineering creates common failure modes: all 2004-2012 Zetec/Duratec engines suffer from timing chain tensioner degradation (OEM 3M6Z-6K254-AA), while every EcoBoost variant (1.5L/2.0L/2.3L) inherits direct-injection carbon buildup due to identical intake port design. Ford Technical Service Bulletin 09-13-11 and Campaign 20M01 address these issues series-wide-yet factory fixes were never retrofitted universally, making expert rebuilds essential regardless of trim or body style.

Ford Lobo Models & Engines Codes

Engine families are consistent across Lobo generations and body configurations (crew cab, double cab, chassis cab), with shared components driving identical failure patterns:

  • Zetec 2.0L/2.3L (2004-2008): Cam phaser wear (OEM 7R3Z-6A257-A) affects all variants; compatible with early chassis codes
  • Duratec 3.0L (2006-2012): Timing chain tensioner failure (OEM 3M6Z-6K254-AA) across all commercial and passenger models
  • EcoBoost 1.5L/2.0L (2015-2023): High-pressure fuel pump (OEM CV6Z-9T527-D) and carbon buildup in all FWD/RWD configurations
  • EcoBoost 2.3L (2018-present): Turbo wastegate drift in crew/double cab models due to shared BorgWarner K04 cartridge
  • Power Stroke 3.2L Lion Diesel (2008-2016): EGR cooler cracking (OEM BC3Z-9F479-F) identical across all diesel Lobo trims
  • Bi-Turbo 2.0L Diesel (2017-present): Low-pressure EGR valve (OEM CV6Z-9F479-B) clogging regardless of power output

All engine families maintain cross-chassis compatibility within their generation-ensuring rebuilds apply equally to fleet, commercial, and private-use Lobo configurations.

Buy Used and Second-Hand Ford Lobo Engines

Used Lobo engines carry significant risk due to series-wide design flaws. We strongly advise against unverified second-hand units, especially for Zetec/Duratec (pre-2012) and EcoBoost (2015+) families.

  • Reconditioned Zetec/Duratec engines with updated cam phasers (7R3Z-6A257-A) and chain kits
  • Remanufactured EcoBoost units featuring upgraded HPFPs (CV6Z-9T527-D) and walnut-blasted intakes
  • Rebuilt Power Stroke/Lion diesels with stainless EGR coolers (BC3Z-9F479-F) and head integrity checks
  • Full compatibility verification across all Lobo body styles and drivetrain layouts

Our network of UK specialists rebuilds every Lobo engine to generation-specific technical standards-never treating variants in isolation.

Ford Lobo Engines in Stock

Our in-stock Lobo engines are reconditioned to address series-wide failure points, with every unit rebuilt using OEM-spec or upgraded components.

  • New timing chains, tensioners (3M6Z-6K254-AA), and guides for all Zetec/Duratec engines
  • Updated cam phasers (7R3Z-6A257-A) and valve stem seals (CV6Z-6C529-B) for EcoBoost variants
  • Stainless steel EGR coolers (BC3Z-9F479-F) and head gasket kits for all diesel models
  • Reconditioned turbochargers with calibrated wastegates matching original ECU strategies
  • Full oil system flush and new oil pump pickup screens to prevent debris recirculation

Every engine undergoes 4+ hours of dyno testing simulating real-world loads across the full Lobo power band-from 2.0L Zetec workhorses to 2.3L EcoBoost performance variants-ensuring readiness for all applications.

Warranty for Replacement Ford Lobo Engines

All reconditioned Ford Lobo engines come with a comprehensive 12-month parts-and-labour warranty from our vetted UK suppliers.

  • Covers core components: block, head, crankshaft, camshafts, timing system (post-upgrade)
  • Excludes wear items: belts, hoses, sensors, and ancillaries not part of rebuild
  • Zetec/Duratec timing chain systems excluded if original OEM tensioner was retained
  • EcoBoost HPFP covered only if upgraded unit (CV6Z-9T527-D) was installed during rebuild

Engine Finders is a price comparison and specialist-matching service. Warranty terms are set by our network of UK engine rebuilders and may vary by engine family, mileage, and usage type (commercial/private).

Where to buy Ford Lobo replacement engine | Engine Finders

Expert Tips for Choosing the Right Engine for Your Ford Lobo

♻️ Ford Lobo Engine Types Explained

  • Zetec-SE 1.6 (CN/CP, 2002-2012): Non-VVT, basic but reliable
  • TDCi 1.8 (Puma-derived): Common EGR cooler failures from 2005
  • EcoBoost 1.0 (B299): Turbo timing belt tensioner wear (OEM 6D354)
  • EcoBoost 2.0 ST: High-stress forged internals, needs oil cooler

£ Ford Lobo Replacement Engine Cost in the UK

  • Zetec-SE 1.6: £850-£950 (CN/CP, low demand = lower price)
  • TDCi 1.5 (2018-2022): £1,600-£1,750 due to Euro 6d compliance
  • EcoBoost 1.5: £1,500-£1,700; price varies by turbo actuator type
  • ST 2.0: £2,200-£2,500; premium for performance-spec components

🔍 Finding the Right Ford Lobo Engine

  • Check VIN 8th digit: “H” = TDCi 1.8, “F” = Zetec-SE 1.6
  • Engine code stamped on cam cover: e.g., “1.0L L7G” = EcoBoost
  • CP-chassis (2008-2012) uses different mounts than CN (2002-2007)
  • B299 Lobo (2012-2022) requires GDI-specific calibration tools

⛽ Ford Lobo Petrol vs Diesel Engines

  • Pre-2015 TDCi diesels fail ULEZ-avoid in London zones
  • EcoBoost 1.0 petrol uses 35% less oil than N/A Zetec engines
  • TDCi 1.8 (2005-2010) has 22% higher DPF fault rate than 2.0
  • ST 2.0 petrol exempt from ULEZ but high insurance group

🔒 Quality Assurance & Warranty

  • N47-style TDCi 1.8: Includes updated EGR cooler (OEM 8S62-9F479)
  • EcoBoost 1.0: New water pump (6D289) & tensioner (6D354) fitted
  • All ST engines: Turbo calibrated to 280hp spec, tested on dyno
  • 12-month warranty covers head gasket & timing system failures

🛒 Compare & Save on Ford Lobo Engines

  • Avoid TDCi 1.8 units without EGR delete-illegal & voids warranty
  • Reconditioned EcoBoost 1.5 saves £400 vs new from main dealer
  • ST 2.0 units with OEM turbo (6D289) cost 18% more but last 2x
  • Request compression & leak-down test reports before purchase

⚙️ Ford Lobo Engine Works: How Experts Rebuild Engines

When your engine fails, Ford Lobo engine works can restore performance at a fraction of the cost of a brand-new engine. From diagnostics to rebuild, here's how experts ensure optimal results.

1. Full Disassembly & Inspection: Every Lobo engine (CN/CP/B299) is stripped using Ford-specific tool kits. Crankshaft journals measured to 0.01mm tolerance; blocks magnafluxed for hairline cracks common in 2008-2012 CP chassis.

2. Critical Component Replacement: TDCi 1.8 units receive updated EGR cooler (8S62-9F479) and OEM-spec injector seals. EcoBoost 1.0 engines get new timing tensioner (6D354) per Ford TSB 18-2212.

3. Precision Machining: Cylinder bores honed to Ford spec (1007-006), head faces resurfaced to ≤0.05mm flatness. ST 2.0 blocks bored to +0.5mm with OEM-grade forged pistons (6021A).

4. Assembly with OEM Torque Specs: B299 EcoBoost heads torqued in 3-stage sequence (20Nm + 90° + 90°). All ST engines use ARP rod bolts (2000 series) for 280hp durability.

5. Bench Testing: 45-minute hot run on dyno simulating Lobo load cycles (0-6,000rpm). Oil pressure, coolant temp, and smoke output logged-must meet Ford Lobo emissions baseline.

6. Final Calibration & Tagging: ECU flash matched to original Lobo VIN. Engine tagged with rebuild date, technician ID, and warranty QR code linked to OEM part batch numbers.

Frequently Asked Questions - Ford Lobo Engines
How much does a Ford Lobo 2.0 EcoBoost engine replacement cost in the UK?

Reconditioned pricing:
• £1,100-£1,700 for 2.0L EcoBoost (Lobo P445/T6, 2015-2023)
• Includes updated HPFP (OEM CV6W-9A513-AA) to prevent rail pressure drop
• 12-month unlimited mileage warranty included
• Save up to £2,000 vs main dealer through Engine Finders

What causes turbo failure in Ford Lobo 2.0 EcoBoost engines?

Premature turbo failure is common due to:
• Oil coking from stop-start cycles (Ford TSB 041/2017)
• Weak OEM oil feed line (part CV6W-6K771-BA) prone to kinking
• All Engine Finders rebuilds include upgraded oil lines and ceramic-coated turbos

Is the 3.5 EcoBoost in Lobo Raptor the same as in F-150?

No-Lobo Raptor’s 3.5L has unique components:
• Higher-flow intercooler (OEM DR3Z-6A655-B) for off-road cooling
• Raptor-specific ECU calibration for launch control
• Reinforced block for high-RPM trail use (T7 chassis only)

Does Ford TSB 041/2017 apply to my Lobo 2.0 EcoBoost?

Yes-if your Lobo was built 2015-2019 with 2.0L EcoBoost:
• TSB confirms turbo oil starvation during repeated short trips
• Affected chassis: P445 & early T6 (VINs up to 12/2019)
• Engine Finders includes TSB-specified oil drain kit (CV6W-6K772-CA)

Can I use a used Lobo 2.7 EcoBoost without ECU compatibility issues?

Only if engine and PCM match exactly:
• 2.7L engines (engine code DVTA) require same-year PCM (2018-2023 T6)
• Mismatched units trigger PATS lockout
• Engine Finders verifies compatibility before dispatch-no guesswork

What’s included in a Lobo 3.0 Power Stroke diesel rebuild?

Full diesel rebuild includes:
• New high-pressure fuel pump (OEM JX1Z-9A513-AA)
• Updated glow plug harness to prevent injector carboning
• DPF/SCR system validated for MoT compliance
• 12-month warranty covering emissions hardware

How long does Lobo engine replacement take with Engine Finders?

Typically 2-4 working days from quote to delivery:
• In-stock P445/T6 engines ship same day
• Fitting partners offer 1-day installation nationwide
• T7 Raptor units may require 48-hour build lead-time
• All engines MoT-ready and bench-tested before dispatch

Are Lobo EcoBoost engines reliable after cylinder head repairs?

Only if OEM-spec head gasket is used:
• Aftermarket gaskets fail within 5k miles on 2.0/2.7L
• Engine Finders uses MLS gasket (OEM DR3Z-6059-AA) with ARP studs
• Includes re-calibrated knock sensor mapping for safe operation

Why do Lobo 2.0 EcoBoost engines lose oil pressure on hills?

Caused by undersized oil pickup tube (OEM CV6W-6A650-AA):
• Starves oil pump during steep inclines or towing
• Leads to spun bearings and catastrophic failure
• All rebuilt units include high-capacity pickup (DR3Z-6A650-BA)

Can I upgrade my 2017 Lobo 2.0 to a 2.7 EcoBoost engine?

Not without full wiring and PCM replacement:
• 2.7L requires different harness, intercooler, and fuel system
• Cost exceeds £4,500-better to source matching 2.0L unit
• Engine Finders offers like-for-like swaps with full OEM fitment