Secure enquiry - no spam, no pressure. Genuine quotes only.
Need a reliable replacement engine for your Dodge Nitro?
Engine Finders specializes in Nitro engines, addressing common diesel and V6 petrol issues across
the entire model range.
Rebuilt units with new seals to address oil‑leak and timing chain concerns.
Complete remanufacture back to factory spec to prevent stalling & overheating issues.
Inspected and restored to reliable condition for high‑mileage 3.7/4.0 V6 units.
Direct swap engines, ideal where misfires and major faults require full replacement.
Cleaned and tested units tuned for reduced oil consumption and smoother idle.
Cost‑effective used engines with verified service history for Nitro models.
Engine Finders connects UK drivers with vetted specialists for reliable, reconditioned Dodge Nitro replacement engines. From the VM Motori 2.8 CRD diesel used across the range to the 3.7L and 4.0L V6 petrol engines found throughout the series, we address common Nitro-wide issues such as EGR failures, timing wear, and oil circulation problems that affect multiple trims and drivetrains.
All Nitro 2.8 CRD diesel variants share the same EGR valve design (OEM 5142799AA), prone to clogging due to carbon buildup. Engine Finders supplies engines rebuilt with upgraded EGR components to restore correct flow across the entire series.
The VM Motori RA428 diesel used throughout the Nitro range is known for timing gear wear affecting all production years. Our partner rebuilders replace critical timing components such as the chain assembly (OEM 5142606AA) using updated tolerances.
Both the 3.7L and 4.0L V6 petrol engines fitted across the Nitro lineup share the same oil pump architecture (OEM 53020877AB), which can suffer pressure drop with age. Supplied engines are rebuilt with revised pumps to protect bearings long-term.
Cooling inefficiencies affect Nitro diesels and petrol engines alike due to shared radiator and thermostat layouts (OEM 68003582AA). Engine Finders ensures all replacement engines are paired with corrected cooling tolerances to prevent overheating across the range.
Every Nitro 2.8 CRD uses the same turbocharger core (OEM 5142797AA), vulnerable to oil starvation over higher mileage. Our sourced engines include reconditioned or replaced turbo units with corrected oil feed geometry.
Nitro engines across all trims share common crank and cam sensor configurations (OEM 56027865AB), requiring precise calibration. Engine Finders ensures ECU compatibility for seamless installation regardless of drivetrain layout.
By sourcing engines built to series-wide specifications rather than single trims, Engine Finders helps Nitro owners save up to £2,500 versus dealer replacements while maintaining reliability across the full model range.
Based on real post-sale feedback from buyers matched with verified UK suppliers.
Engine Finders connects UK drivers with specialists for reliable, reconditioned Dodge Nitro replacement engines, ideal for addressing overheating, oil‑consumption and misfire failures common across Nitro’s V6 lineup. :contentReference[oaicite:0]{index=0}
The Dodge Nitro SUV, built on the Chrysler KA platform, offered primarily the 3.7L and 4.0L V6 petrol engines across its production life. Both V6 families are prone to higher oil consumption, overheating under load and misfire‑related drivability codes, leading many owners to opt for full engine replacement when head gasket, timing components or gasket failures occur. Regular maintenance oversights on cooling and lubrication often accelerate wear in these shared V6 architectures. :contentReference[oaicite:1]{index=1}
Nitro engines are identified by specific OEM engine codes tied to the 3.7‑litre and 4.0‑litre V6 families. These codes help ensure correct fitment and parts coverage when sourcing replacement engines. :contentReference[oaicite:2]{index=2}
All Nitro engines share V6 architectures with similar failure patterns — oil leaks, thermal stress and ignition misfires — making accurate code matching essential for reliable replacement engine sourcing. :contentReference[oaicite:6]{index=6}
Used Nitro engines offer an affordable route to replacement, but buyers must consider shared wear points across 3.7L/4.0L V6 units such as valve cover leaks, cooling failures and misfire causes like worn spark plugs or coils. :contentReference[oaicite:7]{index=7}
Quality used engines reduce cost but should meet minimum wear criteria to avoid early re‑replacement due to inherent V6 thermal and misfire wear patterns. :contentReference[oaicite:8]{index=8}
Our in‑stock Nitro replacement engines include reconditioned 3.7L and 4.0L V6 units with refreshed gaskets, seals and cam/timing components to address overheating and oil‑leak tendencies. :contentReference[oaicite:9]{index=9}
Each engine undergoes bench testing and inspection to mitigate common failure points before shipment. :contentReference[oaicite:10]{index=10}
All Dodge Nitro replacement engines come with a UK‑standard 12‑month warranty covering workmanship and core mechanical failures. :contentReference[oaicite:11]{index=11}
Engine Finders is a price comparison platform — final warranty terms vary by supplier and engine family. :contentReference[oaicite:12]{index=12}
When your engine fails, Dodge Nitro engine works can restore performance at a fraction of the cost of a brand-new engine. From diagnostics to rebuild, here's how experts ensure optimal results.
01. Strip old Nitro engine, tag & bag all 3.7L/2.8L parts for QC checks.
02. Inspect block & heads for warp, corrosion, cracks under magnaflux.
03. Machine hone bores, resurface heads, fit new rings on Nitro block.
04. Replace seals, gaskets, timing chain/belt on Nitro before assembly.
05. Balance rotating assembly, install cams with proper torque specs.
06. Run dynamometer test, verify no misfires and check smoke levels.