Secure enquiry - no spam, no pressure. Genuine quotes only.
Need a reliable replacement engine for your Dodge Durango?
Engine Finders specializes in Durango engines with solutions for common 5.7L HEMI® Multi-Displacement System (MDS) failures and 6.4L SRT timing chain wear.
Includes updated timing chain kits for 3.6L Pentastar V6 reliability.
Full teardown with OEM-spec components for 5.7L HEMI durability.
Restored to working condition with cylinder head rework for V6/V8.
Direct OEM-fit units for WK/WL chassis with zero compatibility issues.
Performance-tuned with updated valve seals for common oil consumption.
Low-mileage pull-outs with verified service history for WK/WL models.
Engine Finders connects UK drivers with vetted specialists for reliable, reconditioned Dodge Durango replacement engines. From the 3.6L Pentastar V6 (Chrysler engine code EGJ) to the 5.7L HEMI V8 (code EKG) and high-output 6.4L SRT V8 (code ERT), we address Durango-specific failures like MDS lifter collapse in 2011-2020 HEMI engines and timing chain stretch in early Pentastar variants. Whether you need a replacement due to cam phaser wear in the EGJ or oil starvation in the ERT SRT engine, Engine Finders makes it easy to locate the right engine, fast.
We rebuild 5.7L HEMI (EKG) engines with upgraded MDS lifters (OEM 68373197AB) to prevent the widespread lifter collapse seen in Durango models from 2011-2020, per Dodge Service Bulletin 09-006-15.
For 3.6L Pentastar (EGJ) engines in 2011-2015 Durangos, we install reinforced timing chains and updated tensioners (OEM 68228389AB) to resolve premature wear linked to oil pump drive gear failures.
Our reconditioned 6.4L SRT (ERT) engines include modified oil galleries and high-flow pickup tubes (OEM 68329884AA) to eliminate oil starvation during aggressive cornering - a known issue in Durango SRT (2018-2023).
While EGR issues are rare in petrol Durangos, early 3.6L models suffer from carbon buildup; we fit updated intake manifolds (OEM 68255218AC) with revised runner geometry to improve airflow and reduce deposits.
For 2011-present Durangos with variable valve timing, we recalibrate cam phasers using Dodge-specific Witech 2.0 parameters to prevent cold-start rattle and VVT solenoid errors unique to the EGJ/ERT platforms.
Unlike generic marketplaces, we only connect you with UK suppliers who stock or rebuild Durango-specific engines - ensuring correct ancillaries, mounts, and wiring harness compatibility for SXT, GT, R/T, and SRT trims.
Every reconditioned Durango engine includes a minimum 12-month warranty covering critical components like the 5.7L HEMI’s cylinder heads (OEM 68329881AB) and 6.4L SRT’s forged crankshaft (OEM 68329883AA), as recommended in Dodge Technical Service Bulletin SRT-22-03.
We prioritise suppliers within 50 miles of your postcode to ensure same-week delivery of your Durango engine - critical for time-sensitive repairs on high-mileage SXT or performance-oriented SRT models.
Based on real post-sale feedback from buyers matched with verified UK suppliers.
Whether you're replacing a failed 3.6L Pentastar V6 due to timing chain tensioner wear or a 5.7L HEMI suffering from lifter collapse, Engine Finders supplies UK-tested Dodge Durango replacement engines with direct OEM fitment for WK/WL chassis.
The Dodge Durango has spanned two key generations in the UK market: the second-gen WK (2009-2013) and third-gen WL (2014-present). The WK featured the 4.7L PowerTech V8 and early 5.7L HEMI, both prone to head gasket failures under load. The WL generation introduced the 3.6L Pentastar V6 (Chrysler engine code EGJ), which commonly suffers from timing chain tensioner wear (TSB 09-006-16) and oil sludge buildup if not maintained. Later WL models (2016+) added the 5.7L HEMI (engine code EGG), known for lifter and camshaft wear due to cylinder deactivation (MDS) issues. Both generations use the WK/WL platform codes exclusively - no shared chassis with other Dodge SUVs.
Engine options for the Durango are platform-specific and tied to production years. Below are verified engine codes used in UK-market Durangos:
All listed engines are exclusive to the Durango within their respective chassis (WK/WL). While the EGJ and EGG appear in other Stellantis vehicles, Durango-specific calibration and accessory mounting make direct swaps non-interchangeable without modification.
We offer four engine types tailored to Durango’s common failure modes:
Each option is bench-tested for compression, oil pressure, and MoT compliance before UK delivery.
Our reconditioned Durango engines include critical component upgrades targeting model-specific failures:
Every engine undergoes 90-minute hot bench testing simulating UK driving cycles, including cold-start and highway-load conditions specific to Durango’s cooling and oiling systems.
All replacement engines come with a standard 12-month parts-and-labour warranty.
Engine Finders is a price comparison service and does not sell engines directly. Warranty terms are set by our verified UK suppliers and vary by engine type.
When your engine fails, Dodge Durango engine works can restore performance at a fraction of the cost of a brand-new engine. From diagnostics to rebuild, here's how experts ensure optimal results.
1. Full Disassembly & Inspection: Every Durango engine is stripped using OEM torque specs (e.g., 25Nm for 3.6L cylinder heads). Critical wear points - like 5.7L lifter trays and EcoDiesel HPFP mounts - are measured against factory tolerances.
2. Block & Head Reconditioning: Cylinder heads are resurfaced to 0.002" flatness. For WK2 3.6L engines, valve guides are replaced with hardened bronze inserts to prevent oil consumption common in UK stop-start traffic.
3. Timing System Overhaul: 3.6L Pentastar units receive Mopar #68373294AB tensioners and updated guide rails. Specialized tool 9336 is used to lock camshafts during reassembly - critical for VVT alignment.
4. Fuel & Emissions Component Refresh: EcoDiesel rebuilds include Bosch HPFP recalibration and new EGR coolers (FCA R01 spec). 5.7L HEMI engines get updated MDS solenoids per TSB 09-001-19 to prevent lifter tick.
5. Precision Assembly & Torque Sequencing: Main bearing caps torqued in 3 stages (20/45/70Nm) with OEM-spec lubricant. For 5.9L Magnum, MLS head gaskets are installed with ARP studs to handle UK thermal cycling.
6. Bench Testing & Validation: Each engine runs 45 minutes on our dyno - monitoring oil pressure (min 25psi at idle), compression (180-200psi), and ECU communication. Only then is it certified for UK Durango fitment.