Secure enquiry - no spam, no pressure. Genuine quotes only.
Need a reliable replacement engine for your Dodge Challenger?
Engine Finders specializes in Challenger engines with solutions for common 6.4L HEMI (392) oil consumption and supercharged 6.2L Hellcat/Demon crank hub failures.
Includes updated valve seals for common 5.7L HEMI oil consumption issues.
Fully machined blocks with upgraded 6.4L HEMI cylinder heads for reliability.
Restored short blocks addressing 3.6L Pentastar timing chain wear.
Plug-and-play units for LX/LD chassis with matching ECU compatibility.
Includes updated oil pumps for 5.7L HEMI lifter tick prevention.
Low-mileage pull-outs with full service history from accident-free LX/LD models.
Engine Finders connects UK drivers with vetted specialists for reliable, reconditioned Dodge Challenger replacement engines. From the 5.7L HEMI (Eagle, 2008-2023) to the supercharged 6.2L Hellcat (2015-2023) and Demon (2018), we address model-specific issues like the 6.2L crank hub shearing (OEM 68371998AB) and 5.7L VVT solenoid oil starvation failures. Whether you need a replacement due to catastrophic supercharger clutch wear in the Hellcat or lifter collapse in early 392 HEMI engines, Engine Finders makes it easy to locate the right engine, fast.
We replace the factory crank hub (OEM 68371998AB) - notorious for shearing under high torque in 2015-2023 Hellcats - with billet steel alternatives that meet SAE J403 standards, addressing Dodge Service Bulletin SRT-17-002.
For the 2018 Demon, we rebuild engines with upgraded supercharger clutches (replacing OEM 68372011AC) to prevent disengagement during transbrake launches - a known flaw documented in Dodge Technical Service Bulletin SRT-18-009.
Our reconditioned 5.7L (Eagle) engines include upgraded MDS lifters (OEM 68371988AA) and revised cam profiles to prevent premature wear - a common issue in 2009-2014 Challengers due to oiling design flaws in the LH engine block.
We modify the oil gallery in 6.4L (2011-2023) engines to resolve VVT solenoid oil starvation, installing high-flow check valves (OEM 68371977AB) as recommended in Dodge Field Fix FF-16-HEMI-04.
All engines are tested with Challenger-specific SRT PCM calibration (e.g., 68372044AD for 2015+ models) to ensure plug-and-play compatibility - unlike generic rebuilds that fail CAN bus communication.
We upgrade radiator flow paths and install high-capacity thermostats (OEM 68371966AC) in all supercharged engines to prevent heat soak - a critical fix for UK stop-start driving not addressed by US-spec rebuilds.
Every Challenger engine includes a digital log of component origins, matching your VIN’s production date (2008-2023) and trim (R/T, SRT, Hellcat, Demon) to ensure correct ancillaries and emissions compliance.
Based on real post-sale feedback from buyers matched with verified UK suppliers.
Whether you're replacing a failed 5.7L HEMI due to lifter tick or a 3.6L Pentastar with timing chain wear, Engine Finders supplies verified Dodge Challenger replacement engines - bench-tested, MoT-compliant, and ready for UK fitment.
The Dodge Challenger (LX/LD platform, 2008-2023) evolved through three distinct generations, each with unique engine reliability profiles. Early models (2008-2014) featured the 5.7L HEMI (V8) and 3.5L V6, prone to oil sludge and valve train wear. The 2015-2023 refresh introduced the 3.6L Pentastar V6 (code ERB), which suffers from timing chain tensioner failure (TSB 09-003-15), and the 6.4L HEMI (code EGG), known for excessive oil consumption. The supercharged 6.2L Hellcat (code EHG) requires careful ECU matching. All engines share the LX/LD chassis architecture, ensuring consistent mounting points but varying ancillary layouts.
Key engine codes used exclusively or predominantly in the Challenger across its production run:
All engines are designed for the LX (2008-2014) and LD (2015-2023) platforms, with identical bellhousing patterns but differing accessory brackets and wiring harnesses.
We supply four engine types tailored to Challenger’s common failure modes:
Each option addresses model-specific weaknesses, ensuring long-term reliability beyond generic replacements.
Our reconditioned Challenger engines include critical updates for known failure points:
Every unit undergoes 2-hour hot bench testing for oil pressure, compression, and idle stability - specifically calibrated for Challenger ECU parameters.
All rebuilt, reconditioned, and remanufactured Challenger engines include a 12-month parts-and-labour warranty.
Engine Finders is a price comparison platform. Final warranty terms are set by the supplying UK engine specialist.
When your engine fails, Dodge Challenger engine works can restore performance at a fraction of the cost of a brand-new engine. From diagnostics to rebuild, here's how experts ensure optimal results.
1. Full Disassembly & Inspection: Every LC-chassis engine is stripped using OEM torque specs; cylinder bores measured with Sunnen gauges to assess wear beyond 0.003” tolerance.
2. Block & Head Reconditioning: Heads pressure-tested for cracks (common near exhaust ports on supercharged units); blocks hot-tanked and align-honed to OEM 0.0015” clearance.
3. Critical Component Replacement: 5.7L HEMI units receive updated MDS lifters (68377299AB) and revised camshafts per TSB 08-007-20 to prevent premature wear in UK stop-start traffic.
4. Precision Assembly: Main bearings torqued to 85 ft-lbs + 90° turn; cylinder head bolts tightened in 4-stage sequence (22 Nm → 45 Nm → 90° → 90°) using calibrated tools.
5. Supercharger Integration (Hellcat/Redeye): IHI units rebuilt with upgraded coupler (Mopar 68391842AA) to address TSB 21-002-20 heat-related slippage in UK summer conditions.
6. Bench Testing & Validation: 45-minute run-in on dyno simulating UK motorway & urban cycles; oil pressure verified at 25+ psi idle, 60+ psi at 3,000 RPM before dispatch.