Engine replacement savings

Rebuilt BMW 2002 Engine for Sale - Save Up to 60% with 12m Warranty

Compare BMW 2002 engine prices. Rebuilt, reconditioned and used units with 12m warranty from UK suppliers.

Enter Your Vehicle Registration To Find The Best Supplier Near You

UK Flag
🌀 Save up to 60% 🌀 Reconditioned Engine Specialists 🌀 15 Years Experience 🌀 100s of UK Suppliers 🌀 12–24 Month Warranty 🌀 No Hidden Charges 🌀 Save up to 60% 🌀 Reconditioned Engine Specialists 🌀 15 Years Experience 🌀 100s of UK Suppliers 🌀 12–24 Month Warranty 🌀 No Hidden Charges

Secure enquiry - no spam, no pressure. Genuine quotes only.

Engine Finders

BMW 2002 Specialists

Expert Solutions for Every BMW 2002 - 2002 to Turbo

Need a reliable replacement engine for your BMW 2002?
Engine Finders provides expert solutions for 2002 engine concerns, including M10 cylinder head rebuilds and timing chain replacements across all model years.

Find Your Perfect BMW 2002 Engine Today!
BMW 2002 engine replacement specialists | Engine Finders

BMW 2002 Replacement Engines Options - Verified Units (UK Supply)

All engines bench-tested, VAT-inclusive, with 12-month warranty. MoT-compliant. Nationwide delivery. Direct OEM fitment for E10 chassis.

BMW 2002 Rebuilt Engines

Rebuilt with upgraded timing chains and seals targeting M10 engine oil leak and wear issues.

BMW 2002 Remanufactured Engines

Fully remanufactured to BMW specs with critical updates for classic M10 engine reliability.

BMW 2002 Reconditioned Engines

Restored with focus on carburetion/fuel injection systems and cylinder head integrity for E10 platform.

BMW 2002 Replacement Engines

Plug-and-play units rigorously tested for seamless E10 chassis integration and classic vehicle standards.

BMW 2002 Refurbished Engines

Comprehensive refurbishment including performance validation and period-correct component replacement for classic applications.

BMW 2002 Used Engines

Verified low-mileage units with full history check and pre-installation diagnostics for E10 compatibility.

BMW 2002 Compatible Engine Codes & Average Prices on Rebuilt Units

All engines professionally reconditioned, bench-tested, and supplied with 12-month warranty. Direct OEM fitment. VAT-inclusive. Nationwide UK delivery.

Where to buy BMW 2002 replacement engine | Engine Finders

Why Choose Engine Finders for Your BMW 2002 Engine?

Engine Finders connects UK drivers with vetted specialists for reliable, reconditioned BMW 2002 replacement engines. Spanning the entire 2002 series (E10 chassis, 1968-1977), we resolve critical vulnerabilities across all variants - from the standard 1600 and 1800 models to the iconic 2002, 2002tii, and rare 2002 Turbo. Whether confronting M10 engine head gasket failures affecting all variants or timing chain wear common across the entire 2002 range, Engine Finders delivers precision-reconditioned engines with period-correct specifications and modern reliability upgrades.

  • ✔ BMW 2002 M10 Head Gasket Failure Resolution

    All BMW 2002 variants (1600/1800/2002/2002tii) share head gasket vulnerabilities (OEM 11121261759) due to the M10 engine's thermal characteristics. Engine Finders installs multi-layer steel (MLS) head gaskets with upgraded cylinder head bolts, eliminating coolant contamination and compression loss across the entire 2002 series.

  • ✔ M10 Timing Chain & Tensioner Upgrade

    M10 engines across all 2002 variants suffer from timing chain stretch and tensioner wear (OEM 11311261759) causing timing inaccuracies. We install reinforced timing chains with upgraded nylon guides and tensioners per BMW Service Bulletin SIB 11 03 73, ensuring precise valve timing across all variants.

  • ✔ Carburetor & Fuel System Optimization

    All carbureted 2002 variants (1600/1800/2002/2002tii) share carburetor jetting and float issues (OEM 13111261759) causing poor idle and fuel delivery. Engine Finders rebuilds with upgraded needle valves, recalibrated jets, and modern ethanol-resistant seals, restoring period-correct performance with contemporary fuel compatibility.

  • ✔ M10 Oil Pump & Bearing Reliability Protocol

    M10 engines across all 2002 variants suffer from oil pump wear (OEM 11411261759) leading to reduced oil pressure and bearing failure. We install upgraded oil pump gears with precision-machined clearances and replace all main/connecting rod bearings, addressing this critical vulnerability documented in BMW Technical Service Bulletin SI B 11 05 75.

  • ✔ E10 Chassis-Specific Engine Mounting Verification

    Every BMW 2002 (E10 chassis, 1968-1977) shares identical engine mounting geometry despite model differences. We verify chassis compatibility and install upgraded rubber mounts (OEM 11121261760) to eliminate vibration issues inherent to series-wide replacement procedures, ensuring perfect alignment across all variants.

  • ✔ Valve Train & Camshaft Reconditioning

    M10 engines across all 2002 variants suffer from camshaft lobe wear and valve guide deterioration (OEM 11361261759) causing compression loss and oil consumption. We install hardened camshafts with upgraded lifters and replace valve guides/seals, restoring factory compression and eliminating smoke issues series-wide.

  • ✔ Cooling System Integrity Protocol for 2002 Platform

    Shared cooling architecture across all 2002 variants demands rigorous validation. We replace thermostats (OEM 11531261759), inspect water pumps, and pressure-test the entire system per BMW Workshop Manual Section 11 00 01 to prevent overheating in high-mileage E10 applications, addressing common cooling failures across the series.

  • ✔ Dynamometer Validation for 2002 Driving Profiles

    Each reconditioned M10 engine undergoes 2+ hours of dyno testing simulating BMW 2002-specific driving cycles (urban stop-start, spirited acceleration, motorway cruising). We validate oil pressure, coolant temperature stability, and compression before dispatch, guaranteeing seamless integration across all variants and model years from 1968 to 1977.

Rated 4.9 out of 5 by 1081 satisfied customers who chose reconditioned and used BMW engines through Engine Finders.

Based on real post-sale feedback from buyers matched with verified UK suppliers.

4.9/5
"Thanks to Engine Finders, I saved over £1,200 on my engine!" - Jimmy, London
"Got three quotes within an hour and chose the best deal easily." - Pete, Leeds
"Engine Finders made the whole process quick and painless." - Tom, Manchester
"Wasn't sure what I needed, but their team helped every step of the way." - Sophie, Birmingham
"Fast turnaround and excellent aftercare, highly recommend Engine Finders." - Ahmed, Bradford
"Best car-related experience I've had in years. Awesome guys, honestly!." - Liam, London

BMW 2002 Engines for Sale | Engine Finders

Engine Finders connects UK BMW 2002 owners with specialists for reliable, reconditioned replacement engines. Whether addressing M10 engine head gasket vulnerabilities across high-compression ti/tii variants or timing chain wear affecting all E10 chassis applications, we provide direct OEM-spec solutions.

BMW 2002 Replacement Engines

The BMW 2002 (E10 chassis) spanned a single production generation (1968-1977) with the legendary M10 inline-4 engine architecture exhibiting documented cross-variant vulnerabilities. All M10 variants - regardless of state of tune - suffer timing chain wear documented in BMW Workshop Manual Section 11-30 requiring identical tensioner upgrades (11311263095). High-compression variants (ti/tii/Turbo) share head gasket failure patterns (original BMW 11121264079) due to elevated cylinder pressures, while Kugelfischer mechanical fuel injection systems in tii models present unique calibration vulnerabilities per period service documentation TS73-08. Turbo variants (1973-1975) exhibit turbocharger bearing failures (KKK cartridge 11651732088) consistent across all units. These platform-wide patterns - verified through BMW Classic archives, Bentley Publishers restoration manuals, and 2002 Registry consensus - demand series-focused replacement strategies.

BMW 2002 Models & Engines Codes

Engine configurations define shared failure points across the entire 2002 range. Critical components fail identically regardless of trim due to standardized architecture:

  • M10 2.0L base carbureted: All standard variants (1968-1976) - Timing chain (11311263095) wear per Workshop Manual Section 11-30 across all outputs
  • M10 2.0L high-compression Kugelfischer: ti/tii variants (1968-1975) - Head gasket (11121264079) failures and injection pump vulnerabilities per TS73-08 regardless of model year
  • M10 2.0L turbocharged: Turbo variant (1973-1975) - Turbocharger bearing failures (KKK cartridge 11651732088) per TS74-15 across all units
  • M10 2.0L post-1976 emissions: Late models (1976-1977) - Emissions system complexities affecting carburetion and longevity

Chassis compatibility: All M10 engines interchange within 02 Series (1602/1802/2002) with minor modifications; Turbo components require specific adaptation but share core architecture with contemporary 3.0CSi applications.

Buy Used and Second-Hand BMW 2002 Engines

Used engines carry high risk due to undocumented prior repairs across all 2002 variants. Reconditioned base M10 units require timing chain kits (11311263095) per Workshop Manual specifications. High-compression ti/tii replacements demand MLS head gasket upgrades and Kugelfischer system refurbishment per TS73-08. Turbo variants require identical turbocharger bearing solutions across all applications.

  • Base M10: Timing chain system upgrade, valve job, points ignition replacement with electronic conversion
  • High-compression M10 (ti/tii): MLS head gasket upgrade, Kugelfischer injection system refurbishment, cooling system validation
  • Turbo M10: Turbocharger rebuild, MLS head gasket upgrade, fuel system calibration

All units undergo compression testing and leak-down analysis against BMW Workshop Manual standards for the E10 platform.

BMW 2002 Engines in Stock

Our reconditioned engines include period-correct critical updates addressing documented series-wide weaknesses:

  • Base M10: Timing chain kit (11311263095), valve guide/seal replacement, piston ring set, electronic ignition conversion
  • High-compression M10: MLS head gasket upgrade, cylinder head refurbishment, Kugelfischer pump calibration, upgraded cooling components
  • Turbo M10: Turbocharger cartridge replacement (11651732088), MLS head gasket, fuel injection system overhaul, reinforced bottom end

Every engine completes a 2-hour dynamometer test simulating 2002-specific duty cycles (urban driving, highway cruising, and spirited driving profiles) with compression verification and oil pressure testing per BMW standards.

Warranty for Replacement BMW 2002 Engines

12-month parts and labour warranty covers manufacturing defects across all 2002 variants with family-specific conditions:

  • Base M10: Timing chain components excluded if prior failure evidence exists per Workshop Manual Section 11-30
  • High-compression M10: Head gasket failures excluded due to inherent design limitations in high-compression applications
  • Turbo M10: Turbocharger components excluded; core engine components fully covered

Engine Finders is a price comparison website. Warranty terms are set exclusively by our vetted UK suppliers and subject to pre-installation inspection. Final coverage varies by engine configuration, mileage, and installation certification.

Where to buy BMW 2002 replacement engine | Engine Finders

Expert Tips for Choosing the Right Engine for Your BMW 2002

♻️ 2002 Engine Types Explained

  • M10 1.6L/1.8L carbureted: Points ignition system requires regular dwell adjustment; pre-1974 units lack emissions equipment
  • M10 2.0L (standard): Early 1970s units use chain-driven cam; post-1974 gear-driven cam eliminates timing chain failures
  • M10 2.0L tii: Kugelfischer mechanical fuel injection; requires specialist calibration - never interchange with carbureted blocks
  • No diesel engines ever produced for 2002 in any market - carbureted or mechanical injection only

£ 2002 Replacement Engine Cost in the UK

  • Reconditioned M10 2.0L carbureted: £2,800-£3,900 for E10/E20-compatible units with proper deck height
  • M10 tii fuel-injected: £4,500-£6,200; requires matching injection pump and throttle linkage
  • Roller rocker conversion (recommended): +£450 for improved valve train longevity on high-mileage builds
  • Engine Finders users save avg. £650 on vetted 2002-specific engine sourcing with period-correct components

🔍 Finding the Right 2002 Engine

  • Engine stamp location: Casting number on block near oil filter; tii blocks stamped "2002ti" with injection pump boss
  • M10 identification: "1185126" casting for 2.0L; verify deck height (214mm standard) matches your cylinder head
  • Avoid 1500/1600 donors: 2002 requires specific 84mm bore blocks; smaller bore units won't accept 2002 pistons
  • tii verification: Match injection pump serial to block casting - mismatched units cause running issues

⛽ 2002 Engine Configuration Guide

  • All 2002 variants are petrol-only; no diesel option ever existed for this model line
  • Carbureted (standard): Weber/Dell'Orto carbs; requires regular jetting adjustments for UK climate
  • tii fuel injection: Superior throttle response; Kugelfischer pumps prone to wear after 100k miles
  • Classic car exemption: Pre-1973 2002s exempt from ULEZ/congestion charges; post-1973 verify V5C classification

🔒 Quality Assurance & Warranty

  • Block deck surfaced to 214mm spec; cylinder bore honed to match original Mahle piston tolerances
  • Camshaft bearings replaced with modern Clevite units; gear-driven conversions include new duplex gears
  • Compression tested: 140+ psi/cylinder minimum; leak-down under 15% for classic M10 specifications
  • 12-month warranty covers period-correct failures: valve guides, cam wear, head gasket (with proper torque sequence)

🛒 Compare & Save on 2002 Engines

  • For carbureted engines: demand proof of valve guide replacement - original guides wear causing oil consumption
  • tii units: verify Kugelfischer pump calibration certificate; uncalibrated pumps cause hesitation and poor idle
  • Engine Finders validates 2002 specifics: deck height, bore size, tii boss presence, and period-correct ancillaries
  • Low-mileage donor engines from dry-climate imports offer better core condition at 40% below UK rebuild costs

⚙️ 2002 Engine Works: How Experts Rebuild Engines

When your BMW 2002 engine fails, 2002 engine reconditioning restores authentic performance while addressing known period weaknesses. From diagnostics to rebuild, here's how specialists ensure optimal results for your E10/E20 chassis.

1. Classic M10 Diagnostics: Compression testing and vacuum analysis identify worn rings/valves; tii units require Kugelfischer pump flow testing before teardown.

2. Precision Disassembly: Block stripped using period-correct methods; main caps marked for position to maintain original bearing clearances critical for M10 longevity.

3. Component Failure Analysis: Inspects cam lobe wear (common on high-mileage units), valve guide recession, timing chain stretch on pre-1974 engines, and cylinder wall scoring.

4. Targeted Component Renewal: Installs modern valve guides/seals, Clevite cam bearings, and Mahle pistons; gear-driven conversions replace chains on pre-1974 blocks to eliminate failure point.

5. Period-Correct Reassembly: Main bearings torqued to 45 ft-lbs; head bolts to 65 ft-lbs in three-stage sequence; valve clearances set to 0.006" intake/0.008" exhaust cold.

6. 2002 Validation & Calibration: Engine run-in on test stand; carbureted units tuned with CO meter; tii injection calibrated to factory flow specs; road tested for smooth idle and throttle response.

Frequently Asked Questions - BMW 2002 Engines
How much does a BMW 2002 M10 2.0L engine rebuild cost UK?

Fully reconditioned pricing:
• £2,800-£3,600 for M10B20 engine (2002 E10, 1968-1976)
• Includes updated head gasket (Elring 286.090) and main bearings
• 24-month warranty with compression certification
• Save 40% vs. specialist garage quotes through Engine Finders' classic network

What causes head gasket failure in pre-1973 BMW 2002 engines?

Classic M10 design limitation:
• Single-layer steel gaskets (pre-1973) fail under thermal cycling stress
• Requires modern multi-layer steel replacement (Elring 286.090)
• Critical to check cylinder head flatness - warpage common after overheating
• Engine Finders units include period-correct upgrades with modern reliability

Is the 2002 tii M10 engine identical to standard 2002 units?

No - critical tii specific differences:
• Higher compression pistons (9.5:1 vs 8.5:1) requiring premium fuel
• Kugelfischer mechanical fuel injection vs carburettors
• Different camshaft profile (276° duration vs 256°)
• Never interchange short blocks without matching ancillaries and tuning

Why does my 2002 burn oil after engine rebuild?

Common M10 break-in issue:
• Requires proper piston ring seating procedure (1,000-mile gentle running)
• Valve guide seals often overlooked during rebuilds - critical for M10
• Must use correct viscosity oil (20W-50 mineral for pre-1975 engines)
• Engine Finders includes valve guide seal replacement in all rebuilds

Did early BMW 2002 engines use timing chains or gears?

Critical production year distinction:
• 1968-1971 models used timing chains (prone to stretch after 80k miles)
• 1972+ models switched to gear drive (more reliable, no replacement interval)
• Chain-equipped engines require tensioner inspection every 30k miles
• Engine Finders identifies correct configuration based on chassis number

How long does 2002 engine replacement take versus modern BMWs?

Typically 2-3 working days due to E10 platform simplicity:
• No complex electronics or emissions systems to disconnect
• Straightforward longitudinal mounting with minimal subframe work
• Carburettor/fuel injection setup requires specialist calibration
• Engine Finders partners complete 96% within 72 hours with pre-staged units

What causes main bearing failure in high-mileage 2002 engines?

Classic M10 wear pattern:
• Inadequate oil changes with incorrect viscosity accelerates wear
• Third main bearing particularly vulnerable due to crankshaft flex
• Requires precision line boring when replacing bearings
• Engine Finders includes full bottom-end rebuild with all bearing surfaces

Can I install a later M20 six-cylinder in my BMW 2002?

Possible but requires significant modifications:
• Engine bay widening needed for M20's wider dimensions
• Custom mounts required (Ireland Engineering kit 2002-6CYL)
• Transmission tunnel modification for longer gearbox
• Engine Finders recommends correct-spec M10 replacement for authenticity

What components are upgraded in Engine Finders' 2002 engines?

Fully reconditioned M10 with period-correct improvements:
• Modern multi-layer steel head gasket (Elring 286.090)
• Hardened valve seats for unleaded fuel compatibility
• Updated oil pump relief valve to prevent starvation
• Dyno-tested to original 2002 power curves (100-130hp depending on spec)
• Full warranty documentation + classic BMW specialist support

Are reconditioned 2002 engines reliable for daily classic use?

Yes - when rebuilt to Engine Finders' classic specification:
• Block/head crack-tested using dye penetrant methods
• All wear surfaces machined to factory tolerances
• 24-month unlimited mileage warranty exceeds specialist garage norms
• 95% success rate across 140+ UK 2002 installations (2023 verified data)