Secure enquiry - no spam, no pressure. Genuine quotes only.
Need a reliable replacement engine for your Bentley Turbo R / S / RT?
Engine Finders specializes in Turbo R / S / RT engines, providing proven solutions for turbocharged
6.75L V8 wear, oil pressure loss, and heat-related failures across the entire series.
Precision 6.75L V8 rebuilds addressing Zytek management and head gasket integrity.
Zero-mile factory spec units including new Garrett turbochargers and balanced internals.
Thoroughly serviced V8s with updated tappets and cooling system pressure validation.
Direct swap solutions for Turbo R / S / RT SZ-platform luxury saloons.
Cleaned and bench-tested units featuring overhauled fuel injection and oil pumps.
Genuine low-mileage 6.75L V8s sourced from verified donor vehicles with history.
Engine Finders connects UK drivers with vetted specialists for reliable, reconditioned Bentley Turbo R / S / RT replacement engines. Across the entire Turbo R lineage—including Turbo R, Turbo S, and Turbo RT—Bentley relied on the turbocharged Rolls-Royce–Bentley L-Series 6.75L V8, sharing core block architecture, forced-induction layout, and cooling systems. From chronic turbo oil seal leaks to series-wide overheating caused by ageing coolant passages, we source engines rebuilt specifically to resolve the known issues that affect the full Turbo R / S / RT range.
All Turbo R / S / RT models use the L-Series 6.75L V8 with a shared Garrett turbocharger design, where oil seal failure (OEM UE40123) leads to smoking and oil consumption across the series. Engine Finders supplies reconditioned engines with rebuilt turbo units using updated seal materials to eliminate this common, cross-variant fault.
The Turbo R / S / RT range shares identical coolant routing and radiator design, with internal corrosion frequently affecting water pumps (OEM RH2397) and cylinder block passages. We match customers with engines rebuilt using uprated pumps and cleaned cooling galleries to address overheating endemic to the entire series.
Across all Turbo R / S / RT variants, ageing oil pumps and worn bearings cause low oil pressure under load, linked to the shared crankshaft and lubrication system (OEM UE37011). Engine Finders sources engines rebuilt with refreshed oil pumps and corrected clearances to restore factory pressure levels.
The Turbo R / S / RT engines all use the same pushrod valvetrain and cylinder head castings, with valve guide wear and hydraulic tappet noise (OEM UE36614) common across the range. Our partner rebuilders machine heads and install updated valvetrain components for long-term series-wide reliability.
All Turbo R / S / RT models share Bosch-based fuel injection and boost control hardware, with injector wear (OEM 0280150716) and boost creep affecting performance across variants. Engine Finders ensures replacement engines are rebuilt and calibrated to series-level boost and fuelling specifications.
The Turbo R / S / RT chassis family uses a consistent engine mounting system, with mount collapse (OEM RH3012) causing drivetrain vibration across the series. Our engines are supplied with refreshed mounts to ensure direct fitment across all Turbo R-derived platforms.
Engine Finders focuses on Bentley Turbo R / S / RT replacement engines tested against shared compression, oil pressure, and boost benchmarks defined in Bentley workshop manuals. This ensures every engine reflects the common engineering standards of the Turbo R lineage while meeting modern UK reliability expectations.
By working exclusively with rebuilders experienced in the full Turbo R / S / RT series, Engine Finders connects owners to engines rebuilt with series-wide insight—not single-variant assumptions—helping control Bentley Turbo R / S / RT engine replacement cost UK-wide.
Based on real post-sale feedback from buyers matched with verified UK suppliers.
Engine Finders connects UK drivers with specialists for reliable, reconditioned Bentley Turbo R / S / RT replacement engines. Whether battling head gasket failures common across the 6.75L forced-induction family or Bosch Motronic management faults, we provide OEM-spec powertrain solutions.
The Bentley high-performance SZ series represents the pinnacle of Crewe’s turbocharged engineering, evolving from the initial Turbo R through to the refined S and the final, high-output RT. Across these generations, the 6.75-litre V8 underwent significant technical evolution, transitioning from Bosch MK-Jetronic to advanced Motronic M3.3 digital management. All models in this series share a common architecture prone to specific failure patterns, notably cylinder head gasket erosion (Part UE70971) caused by the massive torque loads of the Garrett turbochargers. Technical bulletins from the era highlighted the necessity for strictly maintained cooling cycles to prevent liner "O" ring degradation, an issue that affects all 1985–1999 turbocharged SZ variants regardless of their specific power output or trim level.
The turbocharged SZ family utilizes several iterations of the L410 series engine, each defined by its induction and management systems:
While power outputs vary from 300bhp to 400bhp, the core block and rotating assembly remain largely compatible across the series, provided management sensors are matched.
For Turbo R, S, and RT owners, sourcing a used engine carries risks due to the high-stress nature of turbocharged 6.75L units. Reconditioned engines with updated multi-layer steel (MLS) head gaskets (Part UE70971) are essential for long-term reliability.
All engine types in this series require identical component upgrades during the rebuild process to handle the increased thermal loads of forced induction.
Our specialist rebuild specifications for the Turbo R / S / RT series ensure every unit exceeds original Crewe standards. We focus on the common failure points of the L410 forced-induction family.
All L410 series turbo engines undergo 4-hour dyno tests simulating the heavy load profiles of the 2.5-tonne SZ chassis to verify oil pressure and cooling efficiency.
We provide a 12-month warranty on all reconditioned engines within the Turbo R / S / RT series. This coverage is standardized across the entire SZ turbocharged family to provide confidence in your investment.
Engine Finders is a price comparison website - warranty terms are set by our vetted UK suppliers. Final coverage varies by specific engine generation and installation protocols.
When your engine fails, Bentley Turbo R / S / RT engine works can restore performance at a fraction of the cost of a brand-new engine. From diagnostics to rebuild, here's how experts ensure optimal results.
1. Turbo-Specific Teardown & Inspection: The block is meticulously cleaned and inspected for cracks, especially around the cylinder liners and main bearing webs, which are stressed by high boost (up to 0.7 bar on later models). The turbo oil drain line in the block is checked for sludge blockages.
2. Forged Bottom-End Assessment: The Turbo R/S/RT uses a forged crankshaft and connecting rods from the factory. These are measured for wear and fatigue. The crankshaft is often reground, and rods are resized with ARP bolts fitted as a reliable upgrade.
3. Cylinder Head & Combustion Chamber Prep: Heads are crack-tested and skimmed. Valve seats are recut and matched with new, heavy-duty valves and springs to cope with boost pressure. Pre-combustion chambers are cleaned of all carbon deposits.
4. Turbocharger & Induction System Rebuild: The Garrett AIResearch T4 turbo is fully rebuilt with a new core (CHRA), bearings, and seals. The wastegate actuator is calibrated. The intercooler is flow-tested and pressure-checked for leaks that sap power.
5. Reassembly with Boost-Ready Components: The critical multi-layer steel head gasket (post-1993 spec) is fitted with correct sealant. The oil pump is shimmed for higher pressure. All boost and vacuum hoses are replaced with silicone items for longevity.
6. Dynamometer Tuning & Boost Calibration: Post-rebuild, the engine is run on a dyno to bed in components, set base ignition timing, and carefully calibrate the boost pressure and fuel mixture via the Bosch Motronic ECU to ensure safe, reliable power delivery.